In mobile computing, a jammer is a mobile communications device that transmits on the same frequency range as a cellphone to create strong cell tower interference and block cellphone signals and call transmission. Jammers are usually undetectable, and users may experience minimal effects such as poor signal reception.
Sunday, 4 February 2018
SMPS-SWITCH MODE POWER SUPPLY
SMPS-SWITCH MODE POWER SUPPLY
A switched-mode power supply (switching-mode power supply, switch-mode power supply, switched power supply, SMPS, or switcher) is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimises wasted energy. Ideally, a switched-mode power supply dissipates no power. Voltage regulation is achieved by varying the ratio of on-to-off time. In contrast, a linear power supply regulates the output voltage by continually dissipating power in the pass transistor. This higher power conversion efficiency is an important advantage of a switched-mode power supply. Switched-mode power supplies may also be substantially smaller and lighter than a linear supply due to the smaller transformer size and weight.

PLC-PROGRAMMABLE LOGIC CONTROLLER
A programmable logic controller (PLC), or programmable controller is an industrial digital computer which has been ruggedized and adapted for the control of manufacturing processes, such as assembly lines, or robotic devices, or any activity that requires high reliability control and ease of programming and process fault diagnosis.
They were first developed in the automobile industry to provide flexible, ruggedised and easily programmable controllers to replace hard-wired relays, timers and sequencers. Since then they have been widely adopted as high-reliability automation controllers suitable for harsh environments. A PLC is an example of a "hard" real-time system since output results must be produced in response to input conditions within a limited time, otherwise unintended operation will result.
MTNL PRESENTATION - BROADBAND
In telecommunications, broadband is wide bandwidth data transmission which transports multiple signals and traffic types. The medium can be coaxial cable, optical fiber, radio or twisted pair.
In the context of Internet access, broadband is used to mean any high-speed Internet access that is always on and faster than dial-up access over traditional analog or ISDN PSTN services.
Different criteria for "broad" have been applied in different contexts and at different times. Its origin is in physics, acoustics, and radio systems engineering, where it had been used with a meaning similar to "wideband".[1][2] Later, with the advent of digital telecommunications, the term was mainly used for transmission over multiple channels. Whereas a passband signal is also modulated so that it occupies higher frequencies (compared to a baseband signal which is bound to the lowest end of the spectrum, see line coding), it is still occupying a single channel. The key difference is that what is typically considered a broadband signal in this sense is a signal that occupies multiple (non-masking, orthogonal) passbands, thus allowing for much higher throughput over a single medium but with additional complexity in the transmitter/receiver circuitry.
The term became popularized through the 1990s as a marketing term for Internet access that was faster than dialup access, the original Internet access technology, which was limited to a maximum bandwidth of 56 kbit/s. This meaning is only distantly related to its original technical meaning.

MTNL Summer Training Report
MTNL was set up on 1st April, 1986 by the Government of India to upgrade the quality of telecom services, expand the telecom network, and introduce new services and to raise revenue for telecom development needs of India’s key metros’ Delhi, the political capital and Mumbai, the business capital of India. In the past 17 years, the company has taken rapid strides to emerge as India’s leading and one of Asia’s largest telecom operating companies. Spending a period of six weeks with the Telecommunication Networking. The report on how the MTNL basic Telecomm Network work and how to Exchange work and how the company work with Telecommunication network. In training I learned about the various topics i.e basic telephony technology, switching technology, transmission cables, broadband technology, wireless Technology
Automatic Parking system using plc and scada-Prestentation
Parking of cars in a parking area is becoming a difficult task as the number of cars increases while the number of parking spaces is finite. People spend a certain amount of time looking for parking spaces and thus traffic slows down and cause congestion. The information of available parking spaces is not readily available to the people looking for parking spaces.
Automatic Railway crossing using micro controller_synopsis
SYNOPSIS: The objective of this paper is to provide an automatic railway gate at a level crossing replacing the gates operated by the gatekeeper. It deals with two things. Firstly, it deals with the reduction of time for which the gate is being kept closed and secondly, to provide safety to the road user by reducing the accidents. When we go through the daily newspapers we come across many railways accidents occurring at unmanned railway crossings. This is due to the carelessness in manual operations or lack of workers and also the collision of two trains due to the same track. This model is implemented using sensor technique. We placed the sensors at a certain distance from the gate detects the approaching train and accordingly controls the operation of the gate. Also an indicator light has been provided to alert the motorists about the approaching train. This type of gate can be employed is an unmanned level crossing where the chances of accidents are higher and reliable operation is required .Since, the operation is automatic, error due to manual operation is prevented. Automatic railway gate control is highly economical microcontroller based arrangement, designed for use in almost all the unmanned level crossings in the country. Keywords – Microcontroller, Automatic Railway Gate, Level Crossing, Sensors, LED.
EXPERIENCE CERTIFICATE
Date:
To whomsoever it may concern
This is to certify that Mr. / Ms. Employee name has been worked as a Designation in our organization from Date of relieving to Date of relieving. During the time of her / his tenure we found her / him extremely resourceful in all the technologies that she / he is competent.
We found him / her to be a good team player besides being a hard worker. We wish her / him all success in her / his future endeavors.
Yours truly,
Manager Administration
Saturday, 3 February 2018
This project work presents the study and design of PLC based Automatic Multistoried Car Parking System. Automatic Multistoried car parking is an arrangement which is used to park a large number of vehicles in least possible place. For making this arrangement in a real plan very high technological instruments are required. In this project a prototype of such a model is made. This prototype model is made for accommodating Four cars at a time. A motor controlled elevator is used to lift the cars. Controlling of the platforms and checking the vacancies is done by PLC. For unparking of car, Pushbuttons is interfaced with the model for selection of required platform. Automation is done to reduce requirement of space and also to reduce human errors, which in-turn results in highest security and greatest flexibility. Due to these advantages, this system can be used in hotels, railway stations, airports where crowding of car is more.
Group Discussion
Some
important lines that you can use in group discussion
* Good morning
friends. I’m xyz today we are going to
discuss upon……… (Topic name)
*Well I think it’s quite clear.
*I like
to restate and emphasize the goal of today’s
discussion is to deliberate (discuss)
*In my view……..
*Hi friends, I am
xyz. First of all, I would like to thank xyz for starting the discussion on a
positive note.
*I am xyz. I would like to say that………
*Sorry to interrupt you but you are going
out of topic.
*If you need to interrupt someone
(do so politely)
* I agree
with xyz. Let us try
to analyse the situation
better.
*I think we are in danger of
digressing the point again.
* My name is xyz
and I have an important point to highlight.
*Friends we have used already xyz minutes of our
discussion. So it will be better if you are much focused.
*Well, my point of view in that…….
*(IF someone is
interrupting you again and again) I would rather mind if you interrupt me again and I am sure
you will get your own chance to speaks you views
too.
* (IF all
speaking at once) Please-Please calm down first, I request everyone to
concentrate on the goal of the discussion.
* I think
one of our group member
want to make a point, will give chance to contribute…
*Guys we have very little time left so I would like
to conclude discussion with few important points over here.
*Do all of us
agree with these findings at the end of our discussion.
Convert Wired Speaker into Wireless Bluetooth speaker| Easy Way
Convert Wired Speaker into Wireless Bluetooth speaker
Hi Guys
In this video you can Learn in Easy way ,How to convert
Wired Speakers into Wireless Bluetooth Speakers.
Components Required :
* Wired Spreaker
* Bluetooth receiver
* Power Bank / Android charger
Dream 11 Prediction | India vs South Africa 2nd ODI | 2018
TOTAL CASH WON
2nd ODI BEFORE MATCH
Du plessis ruled out in ODI series due to finger injury
2nd ODI AFTER MATCH
Subscribe to:
Posts (Atom)